Workplace Test and Tag Services in Northern Perth

Every kettle, computer charger, power board and power tool in your workplace is a potential hazard if it is damaged or faulty.

Every kettle, computer charger, power board and power tool in your workplace is a potential hazard if it is damaged or faulty. Testing and tagging identifies unsafe portable electrical equipment before it causes harm, helping you look after staff and visitors and meet your workplace safety obligations. Dr Lightning Electrical provides testing and tagging for businesses across Perth’s northern suburbs.

We test your equipment on site, tag each item and let you know about anything that needs to be repaired or removed from use.

What Is Test and Tag?

Testing and tagging is the inspection and electrical testing of portable appliances and leads. Each item is visually checked for damage, tested with specialised equipment and fitted with a tag showing the test date and when the next test is due.

Equipment We Test

  • Computers, monitors, printers and chargers
  • Kettles, microwaves, fridges and other staff room appliances
  • Power boards, extension leads and double adaptors
  • Power tools and portable workshop equipment
  • Commercial kitchen and café appliances with plugs
  • Portable heaters, fans and cleaning equipment

Who Needs Test and Tag?

Offices

Desks are full of chargers, monitors and power boards that get moved, stepped on and overloaded. Regular testing helps keep office equipment safe.

Retail and Hospitality

Shops, cafés and restaurants use equipment that works hard every day. Testing and tagging helps catch damaged leads and appliances before a fault interrupts service.

Warehouses, Workshops and Light Industrial

Tools and leads in tougher environments wear out faster and usually need more frequent testing, so we pay close attention to cords, plugs and casings that see heavy use.

Strata and Property Managers

Common-area equipment such as cleaning machines and shared appliances can be included in a regular schedule.

How Our Test and Tag Service Works

1. Book a visit. Tell us roughly how many items and where they are. We reply the same day during office hours. 2. On-site testing. We work through each area with minimal disruption to staff. 3. Tagging and results. Each item passed receives a tag. Failed items are identified so you can repair or replace them. 4. Walk-through. We run through the results with you, so you know which items passed and which need attention.

If an item fails, we can often quote the repair on the spot, and other electrical jobs on site can be bundled into the same visit to reduce call-out fees.

Why Choose Dr Lightning for Testing and Tagging

  • Licensed electrical contractor EC16655, based in Carramar.
  • Accountable and on time – we show up when we say we will.
  • Honest, upfront quotes that are free and clear, with no surprises.
  • Safe, careful work done to the highest standard on every job.

Areas We Cover

We test and tag workplace equipment across the Cities of Wanneroo, Joondalup, Stirling, Swan and Bayswater.

Test and Tag FAQs

How often does equipment need testing?

It depends on the type of workplace and how the equipment is used. Harsher environments such as workshops usually need more frequent testing than offices. We can advise on a suitable schedule for your site.

What happens if an item fails?

Failed items are clearly identified and should be taken out of use. We can quote to repair it, or you can replace it.

Can testing be done without shutting down the office?

Yes. We work through one area at a time, so most staff can keep working while their equipment is tested.

Book Your Test and Tag

Call 0485 023 043 or send us an enquiry for a free quote.

Explore our other commercial electrical services.

How it works

1

Get in touch

Call, email or send through an enquiry. We reply the same day during office hours.

2

Free quote visit

One of our service techs comes out and gives you a precise quote on site. No surprises.

3

The work

Done properly and safely, with drop sheets down. We leave the place cleaner than we found it.

4

All finished

We test everything, clean up and walk you through what we did.

Lifetime workmanship guarantee

If there’s ever an issue with our installation, we’ll come back and fix it. Guaranteed.

Get a free quote →